德國圖爾克傳感器，FCS-G1/2A4-NA-H1141/L120
電話：O21-3952 9829/3O-8O1O
傳真：O21-6O83 1959
手機：189 1857 2467
QQ：125 5O9 6653
聯系人：張海情
郵箱：8010@shqiantuo.com.cn
公司網站：m.yznetworks.com
流量傳感器
配合信號處理器使用的插入式流量傳感器
液體監測流量傳感器
熱式功能原理
通過電位器調節報警點
通過LED顯示流量狀態
探頭長度120 mm
M12 x 1接插件
4-線制連接處理器
The portfolio comprises inductive, magnetic-inductive, capacitive, photoelectric, ultrasonic, pressure, temperature and flow sensors.
流量傳感器可以快速和可靠地檢測氣體或液體的流速是否超出規定的正常范圍，并且在自動化制造行業中得到了廣泛地應用。
它們可以用于監控流量極限值和流量曲線，但并不適用于高精度的測量。 對于流量傳感器來說，高重復精度是重要的特性之一。
典型應用包括：冷卻液循環監控，泵的空轉保護，廢氣排放管道的流量監控以及空調通風系統監控等。
TURCK流量傳感器分為一體式緊湊型流量傳感器和分體式流量傳感器兩種。
德國圖爾克傳感器，FCS-G1/2A4-NA-H1141/L120
Flow sensors
The detection of flow rates does not require
exact and costly measuring but rather
a reliable monitoring of limit values. Flow
sensors thus have to provide a high degree
of reproducibility. They detect not only limit
values of flow rates but also the flow drift,
meaning the increase or decrease of flow
rate. Regarding the flow, the output signal is
either analog or binary, depending on whether
continuous measurement is required
or the monitoring of a limit value.
Flow meters
Many processes require a steady flow rate of
media in order to guarantee smooth operation
and to maintain the quality level of production
output. Therefore the measuring of
flow rates not only requires a high degree
of reproducibility but also accuracy. The
current flow rate is shown on the display of
the flow meter and a corresponding signal
is given out. The output signal can either be
analog or binary, depending on whether
continuous measurement is required or the
monitoring of a limit value.
Compact devices for
liquid media
■ Sensors with integrated signal processor
■ Sensor and signal processing unit incorporated
in one housing, local adjustment
and display
■ Adjustment via potentiometer, easy
handling
■ Transistor, relay or current output
■ Chemical resistant sensor materials:
Hastelloy, titan, ceramics, plastic
■ FCS series: Insertion principle
– Suited for all nominal pipe diameters
from DN20
– Pressure resistance up to 100 bar
– Adjustable range between 1 cm/s and
300 cm/s
■ FCI series: Inline principle
– Ideal for small nominal pipe diameters
up to DN20,
– Suited for small and middle flow rates,
– No disturbing built-in components,
free pipe cross section, no pressure
loss
– Short response time within seconds
– Adjustable range between 1 ml/min
and 30 l/min
Remote sensors for
liquid media
■ Sensor and signal processing unit as
individual units
■ Small housing styles and minimal space
requirements
■ Adjustment and display at the
signal processor in the cabinet
■ Adjustment via potentiometer,
easy handling
■ High degree of protection IP68,
maximum mounting freedom
■ Transistor, relay or current output
■ Chemical resistant sensor materials:
Hastelloy, titan, ceramics, plastic
■ FCS series: Insertion principle
– Suited for all nominal pipe diameters
from DN20
– Different immerson lengths
– High-pressure version up to 500 bar
– High temperature version
up to 120 °C
– Adjustable range between 1 cm/s and
300 cm/s
FTCI series: Thermal inline
fl ow meter
■ Ideal for small nominal pipe diameters
up to DN20, suited for small and
middle flow rates of water and
water/glycol mix
■ No disturbing built-in components, free
pipe cross section, no pressure loss
■ Short response time within seconds
■ Adjustable range between 1 l/min and
40 l/min
■ Measuring tolerance ≤ 10 % of full scale
■ Two transistor outputs or transistor and
current output
德國圖爾克傳感器，FCS-G1/2A4-NA-H1141/L120
