圖爾克流量傳感器，F(xiàn)CS-G1/2HB2-NA-H1141

 電話：O21-3952 9829/3O-8O1O
傳真：O21-6O83 1959
手機：189 1857 2467
QQ：125 5O9 6653
聯系人：張海情
郵箱：8010@shqiantuo.com.cn
公司網站：m.yznetworks.com

配合信號處理器使用的插入式流量傳感器
液體監測流量傳感器
熱式功能原理
通過電位器調節報警點
通過LED顯示流量狀態
探頭材質Hastelloy B2
M12 x 1接插件
4-線制連接處理器

 The portfolio comprises inductive, magnetic-inductive, capacitive, photoelectric, ultrasonic, pressure, temperature and flow sensors.
流量傳感器可以快速和可靠地檢測氣體或液體的流速是否超出規定的正常范圍，并且在自動化制造行業中得到了廣泛地應用。
它們可以用于監控流量極限值和流量曲線，但并不適用于高精度的測量。 對于流量傳感器來說，高重復精度是重要的特性之一。
典型應用包括：冷卻液循環監控，泵的空轉保護，廢氣排放管道的流量監控以及空調通風系統監控等。
TURCK流量傳感器分為一體式緊湊型流量傳感器和分體式流量傳感器兩種。

圖爾克流量傳感器，F(xiàn)CS-G1/2HB2-NA-H1141

 Signal processing unit to
connect remote insertion and
inline sensors
■ Sensor and signal processing unit are
individual units
■ Small housing styles and minimal space
requirements
■ Adjustment and display at the signal
processor in the control cabinet
■ Adjustment via potentiometer, easy
handling
■ Three different versions are available:
MS96/MK96/MC96
■ Transistor, relay or current output
■ Also for connection of sensors in zone
0 and 1
■ FCS series: Insertion principle
– Suited for all nominal pipe diameters
from DN20
– Different immerson lengths
– High-pressure version up to 500 bar
(only for mounting in zone 1)
– High-temperature version up to 120 °C
(only for mounting in zone 1)
– Adjustable range between 1 cm/s and
200 cm/s
■ FCI series: Inline principle
– Ideal for smaller nominal pipe diameters
up to DN10, suited for smaller
flow rates
– Short response time within seconds
– No disturbing built-in components,
free pipe cross section, no pressure
loss
– Adjustable range between 10 ml/min
and 1.8 l/min
Intrinsically safe sensors
for gaseous media
■ Sensor and signal processing unit are individual
units
■ Small housing styles and minimal space requirements
■ Sensors for zone 0 and 1 available, mounting in
explosion hazardous area
■ Adjustment and display at the signal processor
■ Adjustment via potentiometer, easy handling
■ High degree of protection IP68, maximum
mounting freedom
■ Relay output
■ FCS series: Insertion principle
– Suited for all nominal pipe diameters from
DN20
– High-temperature version up to120 °C
– Adjustable range between 2 m/s and
20 m/s

Flow sensors
The detection of flow rates does not require
exact and costly measuring but rather
a reliable monitoring of limit values. Flow
sensors thus have to provide a high degree
of reproducibility. They detect not only limit
values of flow rates but also the flow drift,
meaning the increase or decrease of flow
rate. Regarding the flow, the output signal is
either analog or binary, depending on whether
continuous measurement is required
or the monitoring of a limit value.
Flow meters
Many processes require a steady flow rate of
media in order to guarantee smooth operation
and to maintain the quality level of production
output. Therefore the measuring of
flow rates not only requires a high degree
of reproducibility but also accuracy. The
current flow rate is shown on the display of
the flow meter and a corresponding signal
is given out. The output signal can either be
analog or binary, depending on whether
continuous measurement is required or the
monitoring of a limit value.

圖爾克流量傳感器，F(xiàn)CS-G1/2HB2-NA-H1141

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!